ShopBaseFree forever shop management software for auto repair shops
Try ShopBase Free β†’
B0113

Passive Entry System Malfunction

2006-2008 Audi A3 3.2L VR6

Low SeverityBodyGeneric (SAE)

Description

The passive/smart entry system that detects key fob proximity for hands-free entry is not functioning.

Symptoms

  • Must press key fob button to unlock
  • Touch-to-unlock door handles not working
  • Passive entry indicator not responding
  • Walk-away lock not working

Common Causes

  • Low-frequency antenna failure
  • Key fob passive entry circuit fault
  • Door handle sensor failure
  • BCM passive entry module issue
  • Key fob battery too weak for passive mode

Diagnostic Steps

  1. Check key fob battery voltage
  2. Test LF antenna at each door handle
  3. Scan BCM for passive entry codes
  4. Test door handle touch sensors
  5. Verify passive entry is enabled in settings

Repair Notes

Replace LF antenna, key fob, or door handle antenna module. Check BCM configuration.

Related Codes

B0110Keyless Entry System General FaultB0114Push Button Start System Circuit

Other Body Codes

B0113 on Other Vehicles

Common Questions

What does code B0113 mean on a 2006-2008 Audi A3?

B0113 stands for "Passive Entry System Malfunction". The passive/smart entry system that detects key fob proximity for hands-free entry is not functioning.

What are the symptoms of B0113 on a Audi A3?

Common symptoms of B0113 include: Must press key fob button to unlock, Touch-to-unlock door handles not working, Passive entry indicator not responding, Walk-away lock not working.

What causes B0113 on a 2006-2008 Audi A3?

Common causes of B0113 include: Low-frequency antenna failure, Key fob passive entry circuit fault, Door handle sensor failure, BCM passive entry module issue, Key fob battery too weak for passive mode.

View Labor Times | View Torque Specs | View Fluid Specs