B0120
Theft Deterrent System Malfunction
2006-2008 Audi A3 3.2L VR6
Low SeverityBodyGeneric (SAE)
Description
A general fault in the vehicle theft deterrent (anti-theft) system. The system may trigger false alarms or not arm properly.
Symptoms
- Security light flashing rapidly
- False alarm activation
- System will not arm
- Horn chirp confirmation missing when locking
Common Causes
- Faulty hood/door/trunk switch
- BCM anti-theft module failure
- Wiring issue
- Aftermarket alarm interfering
- Battery was disconnected
Diagnostic Steps
- Scan BCM for theft deterrent codes
- Check all door, hood, and trunk switches
- Inspect for aftermarket alarm system
- Verify BCM programming
- Test alarm arm/disarm cycle
Repair Notes
Repair faulty switches or wiring. Remove conflicting aftermarket alarm if present.
Related Codes
Other Body Codes
- B0001Driver Frontal Stage 1 Deployment Control
- B0002Driver Frontal Stage 2 Deployment Control
- B0003Passenger Frontal Stage 1 Deployment Control
- B0004Passenger Frontal Stage 2 Deployment Control
- B0005Driver Knee Airbag Deployment Circuit
- B0006Passenger Knee Airbag Deployment Circuit
- B0007Rear Left Side Airbag Deployment Circuit
- B0008Rear Right Side Airbag Deployment Circuit
- B0010Driver Side Airbag Deployment
- B0011Driver Side Airbag Deployment Circuit Open
B0120 on Other Vehicles
Common Questions
What does code B0120 mean on a 2006-2008 Audi A3?
B0120 stands for "Theft Deterrent System Malfunction". A general fault in the vehicle theft deterrent (anti-theft) system. The system may trigger false alarms or not arm properly.
What are the symptoms of B0120 on a Audi A3?
Common symptoms of B0120 include: Security light flashing rapidly, False alarm activation, System will not arm, Horn chirp confirmation missing when locking.
What causes B0120 on a 2006-2008 Audi A3?
Common causes of B0120 include: Faulty hood/door/trunk switch, BCM anti-theft module failure, Wiring issue, Aftermarket alarm interfering, Battery was disconnected.