P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
1992-1998 BMW 318i E36 1.8L I4
Moderate SeverityPowertrainGeneric (SAE)
Description
The exhaust camshaft timing for Bank 1 is more advanced than the PCM commanded.
Symptoms
- Check Engine Light
- Rough idle
- Engine stalling
- Poor fuel economy
Common Causes
- Stuck VVT solenoid
- Dirty oil
- Camshaft phaser wear
- Timing chain stretch
Diagnostic Steps
- Check oil condition
- Test VVT solenoid
- Monitor cam position
- Check timing components
Repair Notes
Service VVT system. Replace solenoid or phaser as needed.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
- P0016Crankshaft Position/Camshaft Position Correlation Bank 1 Sensor A
P0014 on Other Vehicles
Common Questions
What does code P0014 mean on a 1992-1998 BMW 318i E36?
P0014 stands for "Exhaust Camshaft Position Timing Over-Advanced Bank 1". The exhaust camshaft timing for Bank 1 is more advanced than the PCM commanded.
What are the symptoms of P0014 on a BMW 318i E36?
Common symptoms of P0014 include: Check Engine Light, Rough idle, Engine stalling, Poor fuel economy.
What causes P0014 on a 1992-1998 BMW 318i E36?
Common causes of P0014 include: Stuck VVT solenoid, Dirty oil, Camshaft phaser wear, Timing chain stretch.