ShopBaseFree forever shop management software for auto repair shops
Try ShopBase Free β†’
P1519

Idle Control Valve Position Circuit

2001-2005 BMW 330i E46 3.0L I6

Moderate SeverityPowertrain

Description

The DME detected a malfunction in the idle control valve (ICV) position circuit. The ICV regulates airflow at idle to maintain a stable engine speed. On BMW engines, this is commonly caused by a sticking or carbon-fouled valve.

Symptoms

  • Rough or unstable idle
  • Engine stalling at idle
  • Idle speed too high or too low
  • Check Engine Light

Common Causes

  • Carbon-fouled idle control valve
  • Faulty idle control valve motor
  • Wiring issue to ICV
  • Vacuum leak affecting idle
  • DME output driver failure

Diagnostic Steps

  1. Test ICV operation by commanding open/close with scan tool
  2. Measure ICV motor resistance
  3. Clean ICV with throttle body cleaner
  4. Check vacuum lines around throttle body
  5. Inspect ICV wiring

Repair Notes

Clean the idle control valve with throttle body cleaner; replace if cleaning does not resolve the issue.

Related Codes

P0505Idle Air Control SystemP0506Idle Air Control System RPM Lower Than ExpectedP0507Idle Air Control System RPM Higher Than ExpectedP1550Idle Speed Control ErrorP1550Idle Speed Control ErrorP1550TCC Solenoid ValveP1550TCC Solenoid Valve

Other Powertrain Codes

P1519 on Other Vehicles

Common Questions

What does code P1519 mean on a 2001-2005 BMW 330i E46?

P1519 stands for "Idle Control Valve Position Circuit". The DME detected a malfunction in the idle control valve (ICV) position circuit. The ICV regulates airflow at idle to maintain a stable engine speed. On BMW engines, this is commonly caused by a sticking or carbon-fouled valve.

What are the symptoms of P1519 on a BMW 330i E46?

Common symptoms of P1519 include: Rough or unstable idle, Engine stalling at idle, Idle speed too high or too low, Check Engine Light.

What causes P1519 on a 2001-2005 BMW 330i E46?

Common causes of P1519 include: Carbon-fouled idle control valve, Faulty idle control valve motor, Wiring issue to ICV, Vacuum leak affecting idle, DME output driver failure.

View Labor Times | View Torque Specs | View Fluid Specs