B2500
Front Wiper Motor Circuit
2004-2008 Chrysler Crossfire 3.2L V6
Moderate SeverityBodyGeneric (SAE)
Description
Malfunction in the front windshield wiper motor circuit.
Symptoms
- Wipers not moving
- Wipers stuck in one position
- Wipers move erratically
- Wipers do not park correctly
- Wiper motor running but blades not moving
Common Causes
- Faulty wiper motor
- Wiper linkage disconnected
- Wiper switch failure
- Wiring issue
- Wiper module fault
- Seized wiper pivot
Diagnostic Steps
- Check wiper fuse
- Test wiper motor with direct power
- Inspect wiper linkage
- Test wiper switch
- Check wiper module output
- Inspect wiper pivots for seizure
Repair Notes
Replace wiper motor or repair linkage. Lubricate or replace seized wiper pivots.
Related Codes
Other Body Codes
- B0001Driver Frontal Stage 1 Deployment Control
- B0002Driver Frontal Stage 2 Deployment Control
- B0003Passenger Frontal Stage 1 Deployment Control
- B0004Passenger Frontal Stage 2 Deployment Control
- B0005Driver Knee Airbag Deployment Circuit
- B0006Passenger Knee Airbag Deployment Circuit
- B0007Rear Left Side Airbag Deployment Circuit
- B0008Rear Right Side Airbag Deployment Circuit
- B0010Driver Side Airbag Deployment
- B0011Driver Side Airbag Deployment Circuit Open
B2500 on Other Vehicles
Common Questions
What does code B2500 mean on a 2004-2008 Chrysler Crossfire?
B2500 stands for "Front Wiper Motor Circuit". Malfunction in the front windshield wiper motor circuit.
What are the symptoms of B2500 on a Chrysler Crossfire?
Common symptoms of B2500 include: Wipers not moving, Wipers stuck in one position, Wipers move erratically, Wipers do not park correctly, Wiper motor running but blades not moving.
What causes B2500 on a 2004-2008 Chrysler Crossfire?
Common causes of B2500 include: Faulty wiper motor, Wiper linkage disconnected, Wiper switch failure, Wiring issue, Wiper module fault, Seized wiper pivot.