Cruise Control Speed/Distance Sensor
2004-2008 Chrysler Crossfire 3.2L V6
Description
The PCM has detected a malfunction with the speed or distance sensor input used by the cruise control system. The cruise control cannot maintain the set speed because it is not receiving a reliable vehicle speed signal.
Symptoms
- Cruise control inoperative
- Check Engine Light
- Speedometer may be erratic
Common Causes
- Faulty vehicle speed sensor
- Wiring issue in speed sensor circuit
- Damaged speed sensor connector
- Faulty instrument cluster (speed signal source)
- PCM input circuit fault
Diagnostic Steps
- Monitor vehicle speed PID on scan tool during test drive
- Inspect vehicle speed sensor and wiring
- Check speed sensor connector for damage or corrosion
- Test speed sensor output signal
- Verify speedometer operation
Repair Notes
Replace the vehicle speed sensor if it is not providing a reliable signal to the PCM.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P1595 on Other Vehicles
Common Questions
What does code P1595 mean on a 2004-2008 Chrysler Crossfire?
P1595 stands for "Cruise Control Speed/Distance Sensor". The PCM has detected a malfunction with the speed or distance sensor input used by the cruise control system. The cruise control cannot maintain the set speed because it is not receiving a reliable vehicle speed signal.
What are the symptoms of P1595 on a Chrysler Crossfire?
Common symptoms of P1595 include: Cruise control inoperative, Check Engine Light, Speedometer may be erratic.
What causes P1595 on a 2004-2008 Chrysler Crossfire?
Common causes of P1595 include: Faulty vehicle speed sensor, Wiring issue in speed sensor circuit, Damaged speed sensor connector, Faulty instrument cluster (speed signal source), PCM input circuit fault.