B0094
Tail Light Circuit Malfunction
2011-2014 Dodge Avenger 3.6L V6 Pentastar
Moderate SeverityBodyGeneric (SAE)
Description
Malfunction in the tail light circuit. One or both tail lights are not operating correctly.
Symptoms
- Tail light not working
- Tail light flickering
- Fuse blowing repeatedly
- Other drivers flashing headlights at you
Common Causes
- Burnt out tail light bulb
- Corroded bulb socket
- Wiring damage in trunk/hatch area
- Faulty body control module output
- Ground circuit failure
Diagnostic Steps
- Check tail light bulbs
- Inspect bulb socket for corrosion
- Test circuit voltage at socket
- Check ground wire
- Test BCM output for tail light circuit
Repair Notes
Replace bulb and clean socket. Repair ground circuit if corroded.
Related Codes
Other Body Codes
- B0001Driver Frontal Stage 1 Deployment Control
- B0002Driver Frontal Stage 2 Deployment Control
- B0003Passenger Frontal Stage 1 Deployment Control
- B0004Passenger Frontal Stage 2 Deployment Control
- B0005Driver Knee Airbag Deployment Circuit
- B0006Passenger Knee Airbag Deployment Circuit
- B0007Rear Left Side Airbag Deployment Circuit
- B0008Rear Right Side Airbag Deployment Circuit
- B0010Driver Side Airbag Deployment
- B0011Driver Side Airbag Deployment Circuit Open
B0094 on Other Vehicles
Common Questions
What does code B0094 mean on a 2011-2014 Dodge Avenger?
B0094 stands for "Tail Light Circuit Malfunction". Malfunction in the tail light circuit. One or both tail lights are not operating correctly.
What are the symptoms of B0094 on a Dodge Avenger?
Common symptoms of B0094 include: Tail light not working, Tail light flickering, Fuse blowing repeatedly, Other drivers flashing headlights at you.
What causes B0094 on a 2011-2014 Dodge Avenger?
Common causes of B0094 include: Burnt out tail light bulb, Corroded bulb socket, Wiring damage in trunk/hatch area, Faulty body control module output, Ground circuit failure.