C0325
Ride Height Sensor Calibration Required
2011-2014 Dodge Avenger 3.6L V6 Pentastar
Low SeverityChassisGeneric (SAE)
Description
One or more ride height sensors require calibration after service or replacement.
Symptoms
- Suspension warning light
- Incorrect ride height all corners
- Vehicle rides too high or too low
- Ride height asymmetric
Common Causes
- Sensor replaced without calibration
- Suspension component service
- Module replacement
- Battery disconnect on some vehicles
Diagnostic Steps
- Perform ride height sensor calibration with scan tool
- Verify vehicle is on level ground with correct tire pressure
- Check that all sensors are reading plausible values
- Confirm calibration procedure completed successfully
Repair Notes
Perform ride height calibration on level surface with correct tire pressures and no load.
Related Codes
Other Chassis Codes
- C0021LF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0025LF Wheel Speed Sensor Circuit Intermittent
- C0026RF Wheel Speed Sensor Circuit Intermittent
- C0027LR Wheel Speed Sensor Circuit Intermittent
- C0028RR Wheel Speed Sensor Circuit Intermittent
- C0035Left Front Wheel Speed Sensor Circuit
- C0036Left Front Wheel Speed Signal Erratic
C0325 on Other Vehicles
Common Questions
What does code C0325 mean on a 2011-2014 Dodge Avenger?
C0325 stands for "Ride Height Sensor Calibration Required". One or more ride height sensors require calibration after service or replacement.
What are the symptoms of C0325 on a Dodge Avenger?
Common symptoms of C0325 include: Suspension warning light, Incorrect ride height all corners, Vehicle rides too high or too low, Ride height asymmetric.
What causes C0325 on a 2011-2014 Dodge Avenger?
Common causes of C0325 include: Sensor replaced without calibration, Suspension component service, Module replacement, Battery disconnect on some vehicles.