P0502
Vehicle Speed Sensor A Low Input
2011-2014 Dodge Avenger 3.6L V6 Pentastar
Moderate SeverityPowertrainGeneric (SAE)
Description
Low or no signal from VSS.
Symptoms
- Speedometer reads zero
- No shifting
- Cruise control dead
Common Causes
- Faulty VSS
- Open circuit
- Disconnected sensor
Diagnostic Steps
- Test signal output
- Check wiring
- Test sensor
Repair Notes
Replace VSS or repair wiring.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P0502 on Other Vehicles
Common Questions
What does code P0502 mean on a 2011-2014 Dodge Avenger?
P0502 stands for "Vehicle Speed Sensor A Low Input". Low or no signal from VSS.
What are the symptoms of P0502 on a Dodge Avenger?
Common symptoms of P0502 include: Speedometer reads zero, No shifting, Cruise control dead.
What causes P0502 on a 2011-2014 Dodge Avenger?
Common causes of P0502 include: Faulty VSS, Open circuit, Disconnected sensor.