Inline High Pressure Pump Fault
2011-2014 Dodge Avenger 3.6L V6 Pentastar
Description
The PCM has detected a fault with the inline high-pressure fuel pump. The fuel pump is not delivering the commanded fuel pressure, which can cause starting problems and reduced engine performance. Common on Chrysler GDI engines.
Symptoms
- Check Engine Light
- Hard starting or extended crank time
- Rough idle
- Loss of power under acceleration
- Engine stalling
Common Causes
- Failing high-pressure fuel pump
- Clogged fuel filter restricting flow
- Fuel pump relay failure
- Wiring or connector issue at fuel pump
- Low voltage supply to fuel pump module
Diagnostic Steps
- Check fuel pressure with a gauge at the fuel rail
- Monitor fuel pressure PID on scan tool during cranking and at idle
- Inspect fuel pump relay and fuse
- Test fuel pump voltage supply
- Check fuel filter for restriction
Repair Notes
Replace the high-pressure fuel pump if pressure is below specification; check fuel filter and wiring first.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P1193 on Other Vehicles
Common Questions
What does code P1193 mean on a 2011-2014 Dodge Avenger?
P1193 stands for "Inline High Pressure Pump Fault". The PCM has detected a fault with the inline high-pressure fuel pump. The fuel pump is not delivering the commanded fuel pressure, which can cause starting problems and reduced engine performance. Common on Chrysler GDI engines.
What are the symptoms of P1193 on a Dodge Avenger?
Common symptoms of P1193 include: Check Engine Light, Hard starting or extended crank time, Rough idle, Loss of power under acceleration, Engine stalling.
What causes P1193 on a 2011-2014 Dodge Avenger?
Common causes of P1193 include: Failing high-pressure fuel pump, Clogged fuel filter restricting flow, Fuel pump relay failure, Wiring or connector issue at fuel pump, Low voltage supply to fuel pump module.