ShopBaseFree forever shop management software for auto repair shops
Try ShopBase Free β†’
P1586

AT/MT Codification Signal Not Plausible

2015-2021 Kia Sedona 3.3L V6

Moderate SeverityPowertrain

Description

The PCM has received a transmission codification signal that does not match the expected transmission type. The signal indicating whether an automatic or manual transmission is installed is incorrect or missing.

Symptoms

  • Check Engine Light
  • Transmission may enter limp mode
  • Incorrect shift patterns
  • Engine performance may be limited

Common Causes

  • Incorrect PCM software for transmission type
  • Wiring issue in transmission codification circuit
  • Aftermarket transmission swap without PCM recoding
  • PCM connector issue
  • TCM programming mismatch

Diagnostic Steps

  1. Verify PCM software matches installed transmission type
  2. Check transmission codification wiring
  3. Inspect PCM and TCM connectors
  4. Verify correct PCM part number for vehicle configuration
  5. Reprogram PCM if needed

Repair Notes

Reprogram the PCM with the correct transmission configuration software.

Related Codes

P0700Transmission Control System (MIL Request)P0705Transmission Range Sensor Circuit (PRNDL Input)

Other Powertrain Codes

P1586 on Other Vehicles

Common Questions

What does code P1586 mean on a 2015-2021 Kia Sedona?

P1586 stands for "AT/MT Codification Signal Not Plausible". The PCM has received a transmission codification signal that does not match the expected transmission type. The signal indicating whether an automatic or manual transmission is installed is incorrect or missing.

What are the symptoms of P1586 on a Kia Sedona?

Common symptoms of P1586 include: Check Engine Light, Transmission may enter limp mode, Incorrect shift patterns, Engine performance may be limited.

What causes P1586 on a 2015-2021 Kia Sedona?

Common causes of P1586 include: Incorrect PCM software for transmission type, Wiring issue in transmission codification circuit, Aftermarket transmission swap without PCM recoding, PCM connector issue, TCM programming mismatch.

View Labor Times | View Torque Specs | View Fluid Specs