C0435
Lane Keep Assist Camera Calibration Required
2016-2021 Mazda CX-3 2.0L I4
Low SeverityChassisGeneric (SAE)
Description
The forward camera used for lane detection requires calibration.
Symptoms
- LKA unavailable
- LDW may be inaccurate
- Camera calibration message on dash
Common Causes
- Windshield replaced
- Camera removed during service
- Camera mounting shifted
- Software update cleared calibration
Diagnostic Steps
- Perform static camera calibration with manufacturer target
- Perform dynamic calibration drive if required
- Verify windshield meets camera system specifications
- Check camera mounting bracket
Repair Notes
Perform camera calibration per manufacturer procedure. May require static target setup.
Related Codes
Other Chassis Codes
- C0021LF Wheel Speed Sensor Range/Performance
- C0021LF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0025LF Wheel Speed Sensor Circuit Intermittent
- C0025LF Wheel Speed Sensor Circuit Intermittent
C0435 on Other Vehicles
Common Questions
What does code C0435 mean on a 2016-2021 Mazda CX-3?
C0435 stands for "Lane Keep Assist Camera Calibration Required". The forward camera used for lane detection requires calibration.
What are the symptoms of C0435 on a Mazda CX-3?
Common symptoms of C0435 include: LKA unavailable, LDW may be inaccurate, Camera calibration message on dash.
What causes C0435 on a 2016-2021 Mazda CX-3?
Common causes of C0435 include: Windshield replaced, Camera removed during service, Camera mounting shifted, Software update cleared calibration.