P0107
MAP/BARO Pressure Circuit Low Input
2014-2021 Mazda Mazda6 2.5L I4
Moderate SeverityPowertrainGeneric (SAE)
Description
The MAP sensor signal voltage is below the minimum expected value.
Symptoms
- Check Engine Light
- Rich running
- Black smoke
- Loss of power
Common Causes
- Short to ground in MAP circuit
- Faulty MAP sensor
- Disconnected vacuum hose
Diagnostic Steps
- Test MAP voltage
- Check for shorts to ground
- Verify vacuum hose connection
Repair Notes
Repair wiring or replace MAP sensor.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P0107 on Other Vehicles
Common Questions
What does code P0107 mean on a 2014-2021 Mazda Mazda6?
P0107 stands for "MAP/BARO Pressure Circuit Low Input". The MAP sensor signal voltage is below the minimum expected value.
What are the symptoms of P0107 on a Mazda Mazda6?
Common symptoms of P0107 include: Check Engine Light, Rich running, Black smoke, Loss of power.
What causes P0107 on a 2014-2021 Mazda Mazda6?
Common causes of P0107 include: Short to ground in MAP circuit, Faulty MAP sensor, Disconnected vacuum hose.