ShopBaseFree forever shop management software for auto repair shops
Try ShopBase Free β†’
P1260

Anti-Theft System Signal Engine Disabled

2014-2021 Mazda Mazda6 2.5L I4

Critical SeverityPowertrain

Description

The anti-theft immobilizer system has detected an unauthorized start attempt and has disabled the engine. The PCM will not allow fuel injection or ignition until proper key authentication is received.

Symptoms

  • Engine cranks but will not start
  • Security light flashing on dashboard
  • No fuel delivery or spark
  • Engine starts then immediately dies

Common Causes

  • Key transponder not recognized
  • Faulty immobilizer antenna around ignition
  • Incorrect or damaged key
  • Immobilizer module failure
  • Low key battery (push-button start systems)

Diagnostic Steps

  1. Try a second programmed key
  2. Check security indicator light behavior
  3. Inspect immobilizer ring antenna around ignition cylinder
  4. Verify key programming status with scan tool
  5. Check key battery if applicable

Repair Notes

Try a different programmed key first; reprogram keys or replace the immobilizer antenna if faulty.

Other Powertrain Codes

P1260 on Other Vehicles

Common Questions

What does code P1260 mean on a 2014-2021 Mazda Mazda6?

P1260 stands for "Anti-Theft System Signal Engine Disabled". The anti-theft immobilizer system has detected an unauthorized start attempt and has disabled the engine. The PCM will not allow fuel injection or ignition until proper key authentication is received.

What are the symptoms of P1260 on a Mazda Mazda6?

Common symptoms of P1260 include: Engine cranks but will not start, Security light flashing on dashboard, No fuel delivery or spark, Engine starts then immediately dies.

What causes P1260 on a 2014-2021 Mazda Mazda6?

Common causes of P1260 include: Key transponder not recognized, Faulty immobilizer antenna around ignition, Incorrect or damaged key, Immobilizer module failure, Low key battery (push-button start systems).

View Labor Times | View Torque Specs | View Fluid Specs