ShopBaseFree forever shop management software for auto repair shops
Try ShopBase Free β†’
P3605

Start-Stop Climate Control Compensation Fault

2014-2021 Mazda Mazda6 2.5L I4

Moderate SeverityPowertrainGeneric (SAE)

Description

The auxiliary systems that maintain cabin comfort during engine-off periods (electric A/C compressor or thermal storage) are not functioning.

Symptoms

  • Start-stop deactivates quickly in hot/cold weather
  • Cabin temperature drifts rapidly during stops
  • A/C blows warm air at stops
  • Start-stop durations very short
  • Reduced fuel savings from start-stop

Common Causes

  • Electric A/C compressor failure
  • Thermal storage evaporator issue
  • Auxiliary coolant pump fault
  • Electric heater element failure
  • Control module communication error

Diagnostic Steps

  1. Check auxiliary A/C compressor operation during engine stop
  2. Monitor cabin temperature drift rate
  3. Test auxiliary coolant pump
  4. Check electric heater circuit
  5. Monitor start-stop inhibit reasons

Repair Notes

Replace auxiliary A/C compressor or electric heater. Repair auxiliary coolant pump if cabin heating affected.

Related Codes

P3600Auto Start-Stop System MalfunctionP3601Auto Start-Stop Restart Failure

Other Powertrain Codes

P3605 on Other Vehicles

Common Questions

What does code P3605 mean on a 2014-2021 Mazda Mazda6?

P3605 stands for "Start-Stop Climate Control Compensation Fault". The auxiliary systems that maintain cabin comfort during engine-off periods (electric A/C compressor or thermal storage) are not functioning.

What are the symptoms of P3605 on a Mazda Mazda6?

Common symptoms of P3605 include: Start-stop deactivates quickly in hot/cold weather, Cabin temperature drifts rapidly during stops, A/C blows warm air at stops, Start-stop durations very short, Reduced fuel savings from start-stop.

What causes P3605 on a 2014-2021 Mazda Mazda6?

Common causes of P3605 include: Electric A/C compressor failure, Thermal storage evaporator issue, Auxiliary coolant pump fault, Electric heater element failure, Control module communication error.

View Labor Times | View Torque Specs | View Fluid Specs