SRS Control Module Calibration Error
2000-2002 Rolls-Royce Corniche 6.75L V8
Description
The SRS control module calibration data is invalid, missing, or does not match the vehicle configuration.
Symptoms
- Airbag warning light on
- SRS system fully disabled
- All deployment circuits inactive
Common Causes
- Module not programmed to vehicle
- Incorrect replacement module
- Software update failed
- Module from different vehicle installed
Diagnostic Steps
- Verify ACM part number matches vehicle
- Check module calibration with scan tool
- Attempt recalibration/reprogramming
- Verify VIN programming in module
Repair Notes
Reprogram ACM with correct vehicle calibration. Replace if reprogramming fails.
Related Codes
Other Body Codes
- B0001Driver Frontal Stage 1 Deployment Control
- B0002Driver Frontal Stage 2 Deployment Control
- B0003Passenger Frontal Stage 1 Deployment Control
- B0004Passenger Frontal Stage 2 Deployment Control
- B0005Driver Knee Airbag Deployment Circuit
- B0006Passenger Knee Airbag Deployment Circuit
- B0010Driver Side Airbag Deployment
- B0011Driver Side Airbag Deployment Circuit Open
- B0012Driver Side Airbag Deployment Circuit Short to Ground
- B0013Driver Side Airbag Deployment Circuit Short to Battery
B0090 on Other Vehicles
Rolls-Royce Cullinan
2019-2024 6.75L V12 Twin Turbo
Rolls-Royce Dawn
2016-2024 6.6L V12 Twin Turbo
Rolls-Royce Ghost
2010-2024 6.6L V12 Twin Turbo
Rolls-Royce Phantom VII
2003-2017 6.75L V12
Rolls-Royce Phantom VIII
2018-2024 6.75L V12 Twin Turbo
Rolls-Royce Silver Seraph
1998-2002 5.4L V12
Rolls-Royce Silver Spirit
1990-1998 6.75L V8
Rolls-Royce Silver Spur
1990-1998 6.75L V8
Common Questions
What does code B0090 mean on a 2000-2002 Rolls-Royce Corniche?
B0090 stands for "SRS Control Module Calibration Error". The SRS control module calibration data is invalid, missing, or does not match the vehicle configuration.
What are the symptoms of B0090 on a Rolls-Royce Corniche?
Common symptoms of B0090 include: Airbag warning light on, SRS system fully disabled, All deployment circuits inactive.
What causes B0090 on a 2000-2002 Rolls-Royce Corniche?
Common causes of B0090 include: Module not programmed to vehicle, Incorrect replacement module, Software update failed, Module from different vehicle installed.