ShopBaseFree forever shop management software for auto repair shops
Try ShopBase Free β†’
C0201

EPS Motor Circuit Overcurrent

2000-2002 Rolls-Royce Corniche 6.75L V8

High SeverityChassisGeneric (SAE)

Description

The EPS control module detected excessive current draw from the power steering motor.

Symptoms

  • EPS warning light
  • Power steering assist reduced
  • Steering may become very heavy suddenly
  • EPS fault message

Common Causes

  • EPS motor internal short
  • Steering gear binding
  • Low tire pressure causing excessive load
  • EPS motor bearing failure
  • Insufficient module power supply voltage

Diagnostic Steps

  1. Measure EPS motor current draw
  2. Check tire pressures
  3. Inspect steering gear for binding
  4. Test motor winding resistance for shorts
  5. Check battery voltage and alternator output

Repair Notes

Replace EPS motor if shorted. Check steering gear for mechanical binding. Verify electrical supply.

Related Codes

C0200Electric Power Steering Motor CircuitC0205EPS Motor Position Sensor Circuit

Other Chassis Codes

C0201 on Other Vehicles

Common Questions

What does code C0201 mean on a 2000-2002 Rolls-Royce Corniche?

C0201 stands for "EPS Motor Circuit Overcurrent". The EPS control module detected excessive current draw from the power steering motor.

What are the symptoms of C0201 on a Rolls-Royce Corniche?

Common symptoms of C0201 include: EPS warning light, Power steering assist reduced, Steering may become very heavy suddenly, EPS fault message.

What causes C0201 on a 2000-2002 Rolls-Royce Corniche?

Common causes of C0201 include: EPS motor internal short, Steering gear binding, Low tire pressure causing excessive load, EPS motor bearing failure, Insufficient module power supply voltage.

View Labor Times | View Torque Specs | View Fluid Specs