ShopBaseFree forever shop management software for auto repair shops
Try ShopBase Free β†’
P1096

Tumble Generator Valve Circuit 2 Open

2012-2016 Subaru Impreza 2.0L H4

Moderate SeverityPowertrain

Description

The PCM has detected an open circuit in the Tumble Generator Valve 2 actuator circuit on the left-hand bank. This is the left bank counterpart of P1094.

Symptoms

  • Check Engine Light
  • TGV 2 LH does not operate
  • Minor emissions and efficiency impact

Common Causes

  • Broken wire in TGV 2 circuit
  • Disconnected LH actuator connector
  • Corroded pins
  • Open motor winding in actuator
  • PCM output circuit open

Diagnostic Steps

  1. Test TGV 2 actuator motor resistance
  2. Inspect LH actuator connector
  3. Check wiring continuity
  4. Verify PCM drive signal
  5. Compare with RH actuator readings

Repair Notes

Repair open wiring or replace the LH TGV actuator.

Related Codes

P1086Fuel Control Mixture Rich Bank 2P1086Fuel Control Mixture Rich Bank 2P1086Tumble Generator Valve 2 LH Position Sensor LowP1087Tumble Generator Valve 2 LH Position Sensor HighP1092Tumble Generator Valve 2 LH Stuck OpenP1097Tumble Generator Valve Circuit 2 Over Current

Other Powertrain Codes

P1096 on Other Vehicles

Common Questions

What does code P1096 mean on a 2012-2016 Subaru Impreza?

P1096 stands for "Tumble Generator Valve Circuit 2 Open". The PCM has detected an open circuit in the Tumble Generator Valve 2 actuator circuit on the left-hand bank. This is the left bank counterpart of P1094.

What are the symptoms of P1096 on a Subaru Impreza?

Common symptoms of P1096 include: Check Engine Light, TGV 2 LH does not operate, Minor emissions and efficiency impact.

What causes P1096 on a 2012-2016 Subaru Impreza?

Common causes of P1096 include: Broken wire in TGV 2 circuit, Disconnected LH actuator connector, Corroded pins, Open motor winding in actuator, PCM output circuit open.

View Labor Times | View Torque Specs | View Fluid Specs