Invalid Data Received from Parking Brake Control Module
2014-2016 Tesla Model S P85D Dual Motor AWD
Description
Data from the electronic parking brake module is invalid or out of range.
Symptoms
- Parking brake warning light
- EPB status unknown
- Hill hold not working
- Service parking brake message
Common Causes
- EPB module calibration lost
- CAN bus noise
- Module partial failure
- EPB sensor fault
Diagnostic Steps
- Check EPB module for codes
- Test EPB actuator position sensors
- Check CAN bus signal quality
- Recalibrate EPB module
Repair Notes
Recalibrate electronic parking brake. Check actuator position sensors.
Related Codes
Other Network Codes
- U0001High Speed CAN Communication Bus
- U0002High Speed CAN Communication Bus Performance
- U0003High Speed CAN Communication Bus (+) Open
- U0004High Speed CAN Communication Bus (+) Low
- U0005High Speed CAN Communication Bus (+) High
- U0006High Speed CAN Communication Bus (-) Open
- U0007High Speed CAN Communication Bus (-) Low
- U0008High Speed CAN Communication Bus (-) High
- U0009High Speed CAN Communication Bus Shorted Together
- U0010Medium Speed CAN Communication Bus
U0418 on Other Vehicles
Tesla Cybertruck
2024-2024 Cyberbeast Tri Motor AWD
Tesla Cybertruck
2024-2024 Dual Motor AWD
Tesla Cybertruck
2024-2024 Single Motor RWD
Tesla Model 3
2017-2020 Long Range Dual Motor AWD
Tesla Model 3
2017-2020 Performance Dual Motor AWD
Tesla Model 3
2017-2020 Standard Range Plus Single Motor RWD
Tesla Model 3
2021-2024 Long Range Dual Motor AWD
Tesla Model 3
2021-2024 Performance Dual Motor AWD
Common Questions
What does code U0418 mean on a 2014-2016 Tesla Model S?
U0418 stands for "Invalid Data Received from Parking Brake Control Module". Data from the electronic parking brake module is invalid or out of range.
What are the symptoms of U0418 on a Tesla Model S?
Common symptoms of U0418 include: Parking brake warning light, EPB status unknown, Hill hold not working, Service parking brake message.
What causes U0418 on a 2014-2016 Tesla Model S?
Common causes of U0418 include: EPB module calibration lost, CAN bus noise, Module partial failure, EPB sensor fault.