ShopBaseFree forever shop management software for auto repair shops
Try ShopBase Free β†’
U0434

Invalid Data Received from Immobilizer Module

2014-2016 Tesla Model S P85D Dual Motor AWD

High SeverityNetworkGeneric (SAE)

Description

Data from the immobilizer or anti-theft module is invalid, preventing vehicle operation.

Symptoms

  • Vehicle will not start
  • Security indicator flashing
  • Key not accepted
  • Cranking but no fuel/spark
  • Immobilizer fault message

Common Causes

  • Key transponder weak or failing
  • Antenna ring malfunction
  • Immobilizer module corruption
  • CAN bus interference
  • Key not properly programmed

Diagnostic Steps

  1. Test key transponder signal strength
  2. Check antenna ring signal
  3. Attempt key relearn procedure
  4. Check CAN bus quality at immobilizer module
  5. Test with known good key

Repair Notes

Attempt key relearn procedure. If key transponder is weak, program new key.

Related Codes

U0100Lost Communication with ECM/PCMU0167Lost Communication with Immobilizer Control Module

Other Network Codes

U0434 on Other Vehicles

Common Questions

What does code U0434 mean on a 2014-2016 Tesla Model S?

U0434 stands for "Invalid Data Received from Immobilizer Module". Data from the immobilizer or anti-theft module is invalid, preventing vehicle operation.

What are the symptoms of U0434 on a Tesla Model S?

Common symptoms of U0434 include: Vehicle will not start, Security indicator flashing, Key not accepted, Cranking but no fuel/spark, Immobilizer fault message.

What causes U0434 on a 2014-2016 Tesla Model S?

Common causes of U0434 include: Key transponder weak or failing, Antenna ring malfunction, Immobilizer module corruption, CAN bus interference, Key not properly programmed.

View Labor Times | View Torque Specs | View Fluid Specs