Transfer Case Encoder Motor
1990-1997 Geo Tracker 1.6L I4
3 hours
Range: 2 - 4 hours
Estimated confidence
💰 Estimated Labor Cost
$/hr
Low Estimate
$220
2h × $110
Typical
$330
3h × $110
High Estimate
$440
4h × $110
Labor only. Does not include parts, fluids, shop supplies, or taxes.
Related Jobs for This Vehicle
- 100K Service1.5 hrs
- 12V Auxiliary Battery1 hrs
- 30K Service1.5 hrs
- 4WD Actuator1.5 hrs
- 60K Service1.5 hrs
- 90K Service1.5 hrs
- ABS Module2 hrs
- ABS Pump2 hrs
Transfer Case Encoder Motor on Other Vehicles
Common Questions
How long does it take to transfer case encoder motor on a 1990-1997 Geo Tracker?
The standard labor time for transfer case encoder motor on a 1990-1997 Geo Tracker 1.6L I4 is 3 hours. This can range from 2 to 4 hours depending on conditions and technician experience.
How much does transfer case encoder motor cost on a Geo Tracker?
Labor cost for transfer case encoder motor on a 1990-1997 Geo Tracker ranges from $150 to $600, with a typical cost around $330. This is labor only and does not include parts.
What is the labor rate for transfer case encoder motor?
At an independent shop ($110/hr), expect $330 for labor. Dealerships ($150/hr) charge around $450. Budget shops ($75/hr) may charge $225.