Transfer Case Encoder Motor
2013-2018 Ram 2500 6.7L I6 Cummins Diesel
4.6 hours
Range: 3.7 - 5.5 hours
Estimated confidence
💰 Estimated Labor Cost
$/hr
Low Estimate
$407
3.7h × $110
Typical
$506
4.6h × $110
High Estimate
$605
5.5h × $110
Labor only. Does not include parts, fluids, shop supplies, or taxes.
Related Jobs for This Vehicle
- 100K Service8 hrs
- 30K Service3.2 hrs
- 4WD Actuator4.6 hrs
- 60K Service4.8 hrs
- 90K Service6.4 hrs
- ABS Module3.2 hrs
- ABS Pump4 hrs
- ABS Wheel Speed Sensor - Front1.3 hrs
Transfer Case Encoder Motor on Other Vehicles
Common Questions
How long does it take to transfer case encoder motor on a 2013-2018 Ram 2500?
The standard labor time for transfer case encoder motor on a 2013-2018 Ram 2500 6.7L I6 Cummins Diesel is 4.6 hours. This can range from 3.7 to 5.5 hours depending on conditions and technician experience.
How much does transfer case encoder motor cost on a Ram 2500?
Labor cost for transfer case encoder motor on a 2013-2018 Ram 2500 ranges from $278 to $825, with a typical cost around $506. This is labor only and does not include parts.
What is the labor rate for transfer case encoder motor?
At an independent shop ($110/hr), expect $506 for labor. Dealerships ($150/hr) charge around $690. Budget shops ($75/hr) may charge $345.