2007-2010 Audi Q7 Subframe Bushing Torque Specs

3.6L V6

Applies to 2007, 2008, 2009, and 2010 Audi Q7

Labor Time:5.4 hours

🔧 Torque Values5 specifications

Component	lb-ft	Nm	Notes
⚠️ Ball Joint Nut	75	101	—
⚠️ Control Arm Bolts	109	148	—
Mounting Bolts	23	31	—
⚠️ Strut Bolts	98	133	—
⚠️ Wheel Lug Nuts	115	156	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

1990-1997 4.6L V8 Modular

2007-2012 3.7L I5

2011-2016 6.7L V8 Power Stroke Diesel

2022-2024 GT-Line Dual Motor AWD

1992-1995 1.5L I4 D15

2016-2023 2.0L Turbo I4

The primary torque specification for subframe bushing on a 2007-2010 Audi Q7 is 101 Nm (75 lb-ft).

There are 5 torque specifications for subframe bushing on the 2007-2010 Audi Q7 3.6L V6, covering all related fasteners and components.