Home/Torque Specs/BMW/320i/2012-2015 2.0L I4 Turbo N20/Manual Trans Fluid Change

Manual Trans Fluid Change Torque Specifications

2012-2015 BMW 320i 2.0L I4 Turbo N20

Labor Time:0.7 hours

🔧 Torque Values9 specifications

Component	lb-ft	Nm	Notes
Cover Screws	8	11	—
⚠️ Drain Plug	25	34	Use new washer
⚠️ Fill Plug	25	34	—
⚠️ Flywheel Bolts	70	95	Often TTY, tighten in star pattern
⚠️ Mounting Bolts	45	61	—
⚠️ Pan Bolts	12	16	Torque in sequence
Sensor Bolts	8	11	—
⚠️ Transmission Drain Plug	22	30	Use new crush washer if equipped
Transmission Pan Bolts	9	12	Tighten in criss-cross pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Manual Trans Fluid Change Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Kia EV6

2022-2024 GT-Line Dual Motor AWD

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Common Questions

What is the torque spec for manual trans fluid change on a 2012-2015 BMW 320i?

The primary torque specification for manual trans fluid change on a 2012-2015 BMW 320i is 11 Nm (8 lb-ft).

How many torque specs are there for BMW 320i manual trans fluid change?

There are 9 torque specifications for manual trans fluid change on the 2012-2015 BMW 320i 2.0L I4 Turbo N20, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes