Home/Torque Specs/Dodge/Nitro/2007-2011 4.0L V6/Transfer Case Encoder Motor

Transfer Case Encoder Motor Torque Specifications

2007-2011 Dodge Nitro 4.0L V6

Labor Time:4 hours

🔧 Torque Values7 specifications

Component	lb-ft	Nm	Notes
⚠️ Axle Nut	184	250	Use new cotter pin or stake nut
⚠️ CV Bolts	52	70	—
Cover Screws	9	12	—
Differential Cover Bolts	26	35	—
⚠️ Driveshaft U-Joint Straps	15	20	Tighten evenly
Mounting Bolts	23	31	—
⚠️ Wheel Lug Nuts	103	140	Torque in star pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Transfer Case Encoder Motor Torque Specs on Other Vehicles

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Lexus GX 470

2003-2009 4.7L V8

Nissan Titan XD

2016-2019 5.0L V8 Cummins Diesel

Isuzu Ascender

2003-2009 4.2L I6

Ford F-250 Super Duty

2008-2010 6.4L V8 Power Stroke Diesel

Common Questions

What is the torque spec for transfer case encoder motor on a 2007-2011 Dodge Nitro?

The primary torque specification for transfer case encoder motor on a 2007-2011 Dodge Nitro is 250 Nm (184 lb-ft). Note: Use new cotter pin or stake nut

How many torque specs are there for Dodge Nitro transfer case encoder motor?

There are 7 torque specifications for transfer case encoder motor on the 2007-2011 Dodge Nitro 4.0L V6, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes