2012-2020 Ford Focus Engine Rebuild Torque Specs
2.0L I4
Applies to 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, and 2020 Ford Focus
🔧 Torque Values28 specifications
| Component | lb-ft | Nm | Notes |
|---|
| 18 | 25 | — |
| 10 | 14 | Tighten in sequence, 3 passes |
| 10 | 14 | Tighten in sequence from center outward, multiple passes |
| 33 | 45 | TTY - critical torque plus angle |
| 12 | 16 | — |
| 12 | 16 | — |
| 133 | 180 | Often TTY - check spec, may require impact |
| 48 | 65 | TTY - tighten in sequence plus angle |
| 5 | 7 | — |
| 22 | 30 | Apply anti-seize, work hot-to-cold |
| 70 | 95 | Often TTY, tighten in star pattern |
| 15 | 20 | — |
| 15 | 20 | Clean mating surfaces |
| 18 | 25 | — |
| 55 | 75 | TTY - tighten in sequence plus angle |
| 20 | 27 | — |
| 35 | 47 | — |
| 35 | 47 | — |
| 26 | 35 | Use new crush washer |
| 9 | 12 | Tighten in sequence |
| 9 | 12 | — |
| 9 | 12 | — |
| 8 | 11 | — |
| 8 | 11 | — |
| 9 | 12 | Replace if worn |
| 18 | 25 | Install with pin/clip to compress |
| 18 | 25 | Tighten in sequence |
| 7 | 10 | Tighten in sequence |
⚠️ = Critical torque value | Always verify with vehicle-specific service manual
⚠️ Some critical specs are estimated. Please verify sequence.
Other Jobs with Torque Specs
Engine Rebuild Torque Specs on Other Vehicles
Common Questions
What is the torque spec for engine rebuild on a 2012-2020 Ford Focus?
The primary torque specification for engine rebuild on a 2012-2020 Ford Focus is 25 Nm (18 lb-ft).
How many torque specs are there for Ford Focus engine rebuild?
There are 28 torque specifications for engine rebuild on the 2012-2020 Ford Focus 2.0L I4, covering all related fasteners and components.