2007-2010 Jeep Compass Engine Mount - Rear Torque Specs

2.4L I4

Applies to 2007, 2008, 2009, and 2010 Jeep Compass

Labor Time:1.5 hours

🔧 Torque Values7 specifications

Component	lb-ft	Nm	Notes
Cover Bolts	12	16	—
⚠️ Engine Mount-to-Block Bolts	48	65	—
⚠️ Engine Mount-to-Frame Bolts	55	75	—
⚠️ Mount Through Bolt	65	88	—
⚠️ Mount-to-Frame Bolts	45	61	—
⚠️ Mounting Bolts	35	47	—
Sensor Bolts	8	11	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

1990-1997 4.6L V8 Modular

2007-2012 3.7L I5

2011-2016 6.7L V8 Power Stroke Diesel

1992-1995 1.5L I4 D15

2016-2023 2.0L Turbo I4

1995-1999 2.0L Turbo I4

The primary torque specification for engine mount - rear on a 2007-2010 Jeep Compass is 16 Nm (12 lb-ft).

There are 7 torque specifications for engine mount - rear on the 2007-2010 Jeep Compass 2.4L I4, covering all related fasteners and components.